No products in the cart.
Accu-Lug™ Remington 700 Performance Recoil Lug
Fully machined from 17-4 PH heat treated stainless steel billet. Each Recoil lug is precision surface ground then put through a three point thickness inspection to verify a uniformity of +-.0001 or better before leaving the factory.
Standard Accu-Lug: .250″ thick. Features tapered sides and rounded corners to prevent damage to bedding during removal and installation.
High-Performance Accu-Lug: .312″ thick. Same features as the standard lug with a unique computer FEA optimized geometry to maximize stiffness to weight ratio. This reduces flex during recoil for a more uniform pressure on bedding material. Three 3/32″ pin holes on back side allow optional single or double pinning to receiver (2 pins included). All Pin holes are blind drilled from back side for positive pin retention and feature the same .605″ pattern radius as the popular Holland Recoil Lug.
- Material: 17-4 PH Stainless Steel, H900 Heat Treated, 44-46 RHC
- Finish: Oxide blasted matte walls, Surface ground faces
- Height: 1.800″
- Width: 1.312″
- Thickness: 0.25″
- Bore Size: 1.065″
- Pin Holes: None
- Thickness: 0.312″
- Bore Size: 1.075″
- Pin Holes: 3 3/32″, Holland Pattern, 2 Pins Included